CBSE Class 8 Science · Ch 4: Electricity: Magnetic and Heating Effects
CBSE Class 8 Science · Ch 4: Electricity: Magnetic and Heating Effects is an online chapter test in the CBSE Class 8 pattern, covering Electricity: Magnetic and Heating Effects. Attempt it on SeatBeat with a timer like the real exam, then see a detailed solution for every question and your score and weak-topic analysis.
Topics in this test
| Topic | Questions |
|---|---|
| Electricity: Magnetic and Heating Effects | 30 |
Difficulty: 8 medium · 22 hard
Magnetic and Heating Effects MCQ questions with answers
The first 3 of 30 questions. Unlock the series for the rest, each with a solution.
Q1. A student connects many high-power appliances like a heater, iron, and water cooler to the same electrical socket at the same time. This is likely to cause the connecting wires to overheat and possibly catch fire. What is this situation called?
एक विद्यार्थी हीटर, प्रेस और वाटर कूलर जैसे कई उच्च-शक्ति वाले उपकरणों को एक ही समय में एक ही विद्युत सॉकेट से जोड़ देता है। इससे संयोजक तारों के अत्यधिक गर्म होने और संभवतः आग लगने की आशंका होती है। इस स्थिति को क्या कहा जाता है?
- A. Earthing failure, because the appliances are not connected to the ground wire. / भूसंपर्कण विफलता, क्योंकि उपकरण भूमि तार से जुड़े नहीं हैं।
- B. Overloading, because the total current drawn exceeds what the wires are designed to safely carry. / अधिभार (overloading), क्योंकि ली जाने वाली कुल धारा उस मात्रा से अधिक हो जाती है जिसे तार सुरक्षित रूप से वहन करने के लिए बनाए गए हैं।
- C. Fusing, because the fuse wire has already melted and broken the circuit. / फ्यूजिंग, क्योंकि फ्यूज तार पहले ही पिघलकर परिपथ तोड़ चुका है।
- D. Short circuiting, because the wires directly touch each other. / अल्प परिपथन (short circuiting), क्योंकि तार सीधे एक-दूसरे को स्पर्श कर रहे हैं।
Solution
When too many appliances are run together, the total current through the wires becomes larger than they can safely carry, producing excess heat; this is called overloading.
जब बहुत अधिक उपकरण एक साथ चलाए जाते हैं, तो तारों में प्रवाहित कुल धारा उस मात्रा से अधिक हो जाती है जिसे वे सुरक्षित रूप से वहन कर सकते हैं, जिससे अतिरिक्त ऊष्मा उत्पन्न होती है; इसे अधिभार (overloading) कहा जाता है।
Q2. In an electric iron, the connecting cord stays only slightly warm while the heating element inside glows red hot, even though the same current flows through both. What explains this difference?
एक विद्युत प्रेस (इलेक्ट्रिक आयरन) में, संयोजक डोरी (connecting cord) केवल थोड़ी गर्म होती है जबकि भीतर स्थित तापन तत्व (heating element) लाल तप्त हो जाता है, हालांकि दोनों में समान धारा प्रवाहित होती है। इस अंतर का क्या कारण है?
- A. The connecting cord is thicker, so it allows more current to pass without heating. / संयोजक डोरी अधिक मोटी होती है, इसलिए वह गर्म हुए बिना अधिक धारा प्रवाहित होने देती है।
- B. The heating element is made of copper, which heats up more than other metals. / तापन तत्व तांबे का बना होता है, जो अन्य धातुओं की तुलना में अधिक गर्म होता है।
- C. The heating element has a much higher resistance than the connecting cord, so it produces far more heat for the same current. / तापन तत्व का प्रतिरोध संयोजक डोरी की तुलना में बहुत अधिक होता है, इसलिए वह समान धारा के लिए कहीं अधिक ऊष्मा उत्पन्न करता है।
- D. The connecting cord carries alternating current while the heating element carries direct current. / संयोजक डोरी में प्रत्यावर्ती धारा प्रवाहित होती है जबकि तापन तत्व में दिष्ट धारा प्रवाहित होती है।
Solution
Since heat produced depends on resistance ($H = I^2Rt$), the heating element, made of a high-resistance alloy, produces much more heat than the low-resistance connecting cord for the same current.
क्योंकि उत्पन्न ऊष्मा प्रतिरोध पर निर्भर करती है ($H = I^2Rt$), उच्च-प्रतिरोध वाली मिश्रधातु से बना तापन तत्व, समान धारा के लिए निम्न-प्रतिरोध वाली संयोजक डोरी की तुलना में कहीं अधिक ऊष्मा उत्पन्न करता है।
Q3. Due to damaged insulation, the live wire and the neutral wire of a household circuit come into direct contact with each other without any appliance connected between them. What is this condition called, and what happens as a result?
विद्युतरोधन (insulation) क्षतिग्रस्त होने के कारण, घरेलू परिपथ के लाइव तार और उदासीन (neutral) तार के बीच कोई उपकरण जोड़े बिना ही दोनों सीधे संपर्क में आ जाते हैं। इस स्थिति को क्या कहा जाता है, और परिणामस्वरूप क्या होता है?
- A. Earthing; excess current safely flows into the ground through the wires. / भूसंपर्कण (earthing); अतिरिक्त धारा तारों के माध्यम से सुरक्षित रूप से भूमि में प्रवाहित हो जाती है।
- B. Overloading; the voltage supply to the house drops suddenly. / अधिभार (overloading); घर को मिलने वाली वोल्टता की पूर्ति अचानक घट जाती है।
- C. Short circuit; the resistance of the circuit becomes very low, allowing an abnormally large current to flow. / अल्प परिपथ (short circuit); परिपथ का प्रतिरोध बहुत कम हो जाता है, जिससे असामान्य रूप से अधिक धारा प्रवाहित होती है।
- D. Open circuit; no current flows through the wires at all. / खुला परिपथ (open circuit); तारों में कोई धारा बिल्कुल प्रवाहित नहीं होती।
Solution
When live and neutral wires touch directly, the circuit's resistance becomes almost zero, so a very large current flows suddenly; this is called a short circuit and can cause sparking or fire.
जब लाइव और उदासीन तार सीधे स्पर्श करते हैं, तो परिपथ का प्रतिरोध लगभग शून्य हो जाता है, जिससे अचानक बहुत अधिक धारा प्रवाहित होती है; इसे अल्प परिपथ (short circuit) कहा जाता है और यह चिंगारी या आग का कारण बन सकता है।
Frequently asked questions
How many questions are in the CBSE Class 8 Science · Ch 4: Electricity: Magnetic and Heating Effects?
30 questions for 30 marks, to be answered in 20 minutes.
Is there negative marking in the CBSE Class 8 Science · Ch 4: Electricity: Magnetic and Heating Effects?
No — wrong answers are not penalised in this test.
Which topics does the CBSE Class 8 Science · Ch 4: Electricity: Magnetic and Heating Effects cover?
Electricity: Magnetic and Heating Effects (30 questions).
Is the CBSE Class 8 Science · Ch 4: Electricity: Magnetic and Heating Effects free?
It is part of the CBSE Class 8 Test Series 2027 — Chapter-wise + Full Tests (64 tests, ₹99). You can first try English · Ch 1: The Wit that Won Hearts for free.
More tests in the CBSE Class 8 Test Series 2027 — Chapter-wise + Full Tests
- English · Ch 1: The Wit that Won HeartsFree
- English · Ch 2: A Concrete Example
- English · Ch 3: Wisdom Paves the Way
- English · Ch 4: A Tale of Valour
- English · Ch 5: Somebody's Mother
- English · Ch 6: Verghese Kurien — I Too Had a Dream
- Hindi · Ch 1: SwadeshFree
- Hindi · Ch 2: Do Gauraiya
- Hindi · Ch 3: Ek Aashirvad
- Hindi · Ch 4: Haridwar
- Hindi · Ch 5: Kabeer Ke Dohe
- Hindi · Ch 6: Ek Tokari Bhar Mitti
- Mathematics · Ch 1: A Square and A CubeFree
- Mathematics · Ch 2: Power Play
- Mathematics · Ch 3: A Story of Numbers
- Mathematics · Ch 4: Quadrilaterals
- Mathematics · Ch 5: Number Play
- Mathematics · Ch 6: We Distribute, Yet Things Multiply
- Sanskrit · Ch 1: SubhashitaniFree
- Sanskrit · Ch 2: Bilasya Vani Na Kadapi Me Shruta
- Sanskrit · Ch 3: DigiBharatam
- Sanskrit · Ch 4: Sadaiva Purato Nidhehi Charanam
- Sanskrit · Ch 5: Kantakenaiva Kantakam
- Sanskrit · Ch 6: Griham Shunyam Sutam Vina
- Science · Ch 1: Exploring the Investigative World of ScienceFree
- Science · Ch 2: The Invisible Living World: Beyond Our Naked Eye
- Science · Ch 3: Health: The Ultimate Treasure
- Science · Ch 5: Exploring Forces
- Science · Ch 6: Pressure, Winds, Storms, and Cyclones
- Social Science · Ch 1: Natural Resources and Their UseFree
See the full CBSE Class 8 Test Series 2027 — Chapter-wise + Full Tests → · CBSE Class 8: pattern, notification & syllabus →